My IP Check
Your public IP address and network location, detected automatically.
Loads automatically when you open NetChecks — no input needed. Use the Refresh button to re-check after switching networks or reconnecting your VPN.
Your browser
All-in-One Scan
Runs every relevant check against one IP or hostname in a single pass: DNS, whois, ping, traceroute, a well-known-ports scan (1-1024), HTTP headers and the SSL certificate.
Enter a domain or IP address and run it to check DNS, whois, ping, traceroute, common ports, HTTP headers, and the SSL certificate all at once.
Most checks run in parallel - typically finishes in about 30 seconds, longer if the target is slow or unreachable.
The port scan step only runs once the consent checkbox above is checked - every other check runs regardless.
Ping
Send ICMP echo requests to a host to check reachability and latency.
Enter a hostname or IP address and press Ping to send ICMP echo requests and measure round-trip latency.
Traceroute
Trace the network path (hop by hop) to a destination host.
Enter a hostname or IP address and run it to see every network hop between this server and the destination, with latency per hop.
DNS Lookup (Nslookup)
Query DNS records: A, AAAA, MX, TXT, NS, CNAME, SOA, PTR, SRV, CAA.
Enter a domain, choose a record type (A, AAAA, MX, TXT, NS, CNAME, SOA, PTR, SRV, or CAA), then look it up.
Whois
Look up registration information for a domain or IP address.
Enter a domain or IP address to look up its registration details — registrar, owner organization, and important dates.
Blacklist Check
Check whether an IP address or domain is listed on public spam/abuse blocklists (DNSBL).
Enter an IPv4 address or domain and run it to check 7 public DNSBL/RBL blocklists at once - each shows as listed, not listed, or check failed.
TCP Port Scan
Check whether TCP ports are open on a host or IP: common ports, a custom list, or the full 1-65535 range.
Enter a host or IP, pick common ports, a custom list, or the full range, then scan to see which TCP ports respond.
A full range scan can take up to ~100 seconds. Large scans (more than 100 ports, including custom ranges/lists) are limited to 1 per minute per visitor.
Open ports (0)
HTTP Header Inspector
Fetch the HTTP response status and headers for a URL.
Enter a URL to fetch its HTTP response status code and every response header the server sends back.
SSL / TLS Certificate Checker
Inspect a host's TLS certificate: issuer, validity dates, and days remaining.
Enter a hostname to inspect its TLS certificate — issuer, validity dates, and days remaining before it expires.
Geo-IP Lookup
Look up the geographic location and network info for an IP address. Leave empty to look up your own public IP.
Enter any IP address, or leave it empty to look up your own, to see its approximate location and network/ISP info.
Subnet / CIDR Calculator
Computed entirely in your browser — no data sent to the server.
Enter an IP address and CIDR prefix (e.g. 192.168.1.0/24) to instantly compute the network range, broadcast address, and usable host count.
Speed Test
Basic download/upload throughput test against this server (accuracy depends on the server's own uplink).
Press Start to measure download and upload throughput against this server. Accuracy depends on this server's own connection.
Country Code Dictionary
ISO 3166-1 alpha-2 country codes — searched entirely in your browser.
Search or browse the list of ISO 3166-1 alpha-2 country codes, looked up entirely in your browser.
| Country | ISO Code |
|---|
Learn more about Country Code Dictionary
What it is
Reference table of country codes standardized under ISO 3166: the two-letter alpha-2 code (for example FR for France), the three-letter alpha-3 code (FRA), and the associated numeric code, covering every country and territory officially recognized under this standard.
How it works
These codes form the international reference standard used across a wide range of technical systems: country-code top-level domains (ccTLDs, such as .fr or .de, derived directly from the alpha-2 code), country fields in online forms, international structured data exchange standards, and locale configuration in virtually every modern piece of software.
Reading the results
The alpha-2 code is by far the most common in practice in computing systems, not least because it directly forms the basis of country-code domain extensions. The alpha-3 code is instead preferred in certain regulatory, financial, or diplomatic contexts where ambiguity needs to be minimized as much as possible, the three-letter format reducing the risk of confusion between countries with similar short names or codes.
Common mistakes
A common mistake in software development is mixing up the ISO 3166 country code (which denotes a territory) with the ISO 639 language code (which denotes a spoken language) in locale identifiers - a single country can have several official languages, and a single language can be spoken in several countries, which makes this distinction structurally important to respect in any internationalized application.
When to use it
Correctly configuring the country fields of an application or a form intended for a multi-country audience. Matching an observed country-code domain extension back to its actual country of origin during an investigation or audit. Serving as a quick, reliable reference when configuring an application locale for a team spread across several countries - a frequent scenario in a France-India context.
Phone Dialing Code Dictionary
International calling codes by country — searched entirely in your browser.
Search or browse international calling codes by country, looked up entirely in your browser.
| Country | Dial Code |
|---|
World Clock
Pick a time zone to see the current time — drag the globe to spin it.
Pick a time zone from the list, or drag the globe, to see the current time there.
—
—
Drag to rotate the globe.
French Mobile Network Status
Mobile antenna sites down or under maintenance in France, by operator (Orange, Free, SFR, Bouygues Telecom), from ARCEP's public data. Snapshot updated once a day by ARCEP - not a minute-by-minute feed.
Browse mobile antenna and fibre outage data by French operator — no input needed, updated automatically from ARCEP's public data.
Most affected departments
Number of sites currently down or under maintenance, by department. Click an operator above to filter.
Data: Arcep — Sites indisponibles · Official network status map
Fixed Network (Fibre)
Fibre (FTTH) network quality by operator: reported-outage rate and connection-failure rate, from ARCEP's public data. Monthly indicators, 6-month rolling average - not a live feed like the mobile section.
By operator (parent group)
Averages over the last 6 available months, per infrastructure-operator parent group.