My IP Check
Your public IP address and network location, detected automatically.
Loads automatically when you open NetChecks — no input needed. Use the Refresh button to re-check after switching networks or reconnecting your VPN.
Your browser
All-in-One Scan
Runs every relevant check against one IP or hostname in a single pass: DNS, whois, ping, traceroute, a well-known-ports scan (1-1024), HTTP headers and the SSL certificate.
Enter a domain or IP address and run it to check DNS, whois, ping, traceroute, common ports, HTTP headers, and the SSL certificate all at once.
Most checks run in parallel - typically finishes in about 30 seconds, longer if the target is slow or unreachable.
The port scan step only runs once the consent checkbox above is checked - every other check runs regardless.
Ping
Send ICMP echo requests to a host to check reachability and latency.
Enter a hostname or IP address and press Ping to send ICMP echo requests and measure round-trip latency.
Traceroute
Trace the network path (hop by hop) to a destination host.
Enter a hostname or IP address and run it to see every network hop between this server and the destination, with latency per hop.
DNS Lookup (Nslookup)
Query DNS records: A, AAAA, MX, TXT, NS, CNAME, SOA, PTR, SRV, CAA.
Enter a domain, choose a record type (A, AAAA, MX, TXT, NS, CNAME, SOA, PTR, SRV, or CAA), then look it up.
Whois
Look up registration information for a domain or IP address.
Enter a domain or IP address to look up its registration details — registrar, owner organization, and important dates.
Blacklist Check
Check whether an IP address or domain is listed on public spam/abuse blocklists (DNSBL).
Enter an IPv4 address or domain and run it to check 7 public DNSBL/RBL blocklists at once - each shows as listed, not listed, or check failed.
TCP Port Scan
Check whether TCP ports are open on a host or IP: common ports, a custom list, or the full 1-65535 range.
Enter a host or IP, pick common ports, a custom list, or the full range, then scan to see which TCP ports respond.
A full range scan can take up to ~100 seconds. Large scans (more than 100 ports, including custom ranges/lists) are limited to 1 per minute per visitor.
Open ports (0)
HTTP Header Inspector
Fetch the HTTP response status and headers for a URL.
Enter a URL to fetch its HTTP response status code and every response header the server sends back.
SSL / TLS Certificate Checker
Inspect a host's TLS certificate: issuer, validity dates, and days remaining.
Enter a hostname to inspect its TLS certificate — issuer, validity dates, and days remaining before it expires.
Geo-IP Lookup
Look up the geographic location and network info for an IP address. Leave empty to look up your own public IP.
Enter any IP address, or leave it empty to look up your own, to see its approximate location and network/ISP info.
Subnet / CIDR Calculator
Computed entirely in your browser — no data sent to the server.
Enter an IP address and CIDR prefix (e.g. 192.168.1.0/24) to instantly compute the network range, broadcast address, and usable host count.
Speed Test
Basic download/upload throughput test against this server (accuracy depends on the server's own uplink).
Press Start to measure download and upload throughput against this server. Accuracy depends on this server's own connection.
Country Code Dictionary
ISO 3166-1 alpha-2 country codes — searched entirely in your browser.
Search or browse the list of ISO 3166-1 alpha-2 country codes, looked up entirely in your browser.
| Country | ISO Code |
|---|
Phone Dialing Code Dictionary
International calling codes by country — searched entirely in your browser.
Search or browse international calling codes by country, looked up entirely in your browser.
| Country | Dial Code |
|---|
Learn more about Phone Dialing Code Dictionary
What it is
Reference table of international dialing codes by country, as defined by the international numbering plan set out by the ITU (International Telecommunication Union) in its E.164 recommendation, the global reference standard for telephone numbering.
How it works
Each country or numbering zone is assigned a unique international prefix of its own, dialed right after the international exit prefix (typically the + symbol or the 00 sequence, depending on local convention), which lets telephone networks anywhere in the world, regardless of carrier, correctly route a call to the right destination country before even processing the local number itself.
Reading the results
Some countries share a common international numbering zone - the best-known case being +1, which covers all of North America and part of the Caribbean, further split internally by regional area code - while the vast majority of other countries each have their own strictly national, exclusive dialing code.
Common mistakes
A common mistake in international forms is validating a phone number based purely on its total digit count, without accounting for the fact that the normal length of a national number varies significantly from one country to another - a validation rule calibrated for a single country silently rejects perfectly valid numbers elsewhere in the world.
When to use it
Correctly validating the format of a phone number in an application form aimed at an international audience. Configuring the dial plan of a phone system (PBX or IVR) for a team spread across several countries, particularly common for an MSP operating a France-India setup. Quickly checking the consistency between a displayed dialing code and the actual stated country for a given contact.
World Clock
Pick a time zone to see the current time — drag the globe to spin it.
Pick a time zone from the list, or drag the globe, to see the current time there.
—
—
Drag to rotate the globe.
French Mobile Network Status
Mobile antenna sites down or under maintenance in France, by operator (Orange, Free, SFR, Bouygues Telecom), from ARCEP's public data. Snapshot updated once a day by ARCEP - not a minute-by-minute feed.
Browse mobile antenna and fibre outage data by French operator — no input needed, updated automatically from ARCEP's public data.
Most affected departments
Number of sites currently down or under maintenance, by department. Click an operator above to filter.
Data: Arcep — Sites indisponibles · Official network status map
Fixed Network (Fibre)
Fibre (FTTH) network quality by operator: reported-outage rate and connection-failure rate, from ARCEP's public data. Monthly indicators, 6-month rolling average - not a live feed like the mobile section.
By operator (parent group)
Averages over the last 6 available months, per infrastructure-operator parent group.