My IP Check
Your public IP address and network location, detected automatically.
Loads automatically when you open NetChecks — no input needed. Use the Refresh button to re-check after switching networks or reconnecting your VPN.
Your browser
All-in-One Scan
Runs every relevant check against one IP or hostname in a single pass: DNS, whois, ping, traceroute, a well-known-ports scan (1-1024), HTTP headers and the SSL certificate.
Enter a domain or IP address and run it to check DNS, whois, ping, traceroute, common ports, HTTP headers, and the SSL certificate all at once.
Most checks run in parallel - typically finishes in about 30 seconds, longer if the target is slow or unreachable.
The port scan step only runs once the consent checkbox above is checked - every other check runs regardless.
Ping
Send ICMP echo requests to a host to check reachability and latency.
Enter a hostname or IP address and press Ping to send ICMP echo requests and measure round-trip latency.
Traceroute
Trace the network path (hop by hop) to a destination host.
Enter a hostname or IP address and run it to see every network hop between this server and the destination, with latency per hop.
DNS Lookup (Nslookup)
Query DNS records: A, AAAA, MX, TXT, NS, CNAME, SOA, PTR, SRV, CAA.
Enter a domain, choose a record type (A, AAAA, MX, TXT, NS, CNAME, SOA, PTR, SRV, or CAA), then look it up.
Whois
Look up registration information for a domain or IP address.
Enter a domain or IP address to look up its registration details — registrar, owner organization, and important dates.
Blacklist Check
Check whether an IP address or domain is listed on public spam/abuse blocklists (DNSBL).
Enter an IPv4 address or domain and run it to check 7 public DNSBL/RBL blocklists at once - each shows as listed, not listed, or check failed.
TCP Port Scan
Check whether TCP ports are open on a host or IP: common ports, a custom list, or the full 1-65535 range.
Enter a host or IP, pick common ports, a custom list, or the full range, then scan to see which TCP ports respond.
A full range scan can take up to ~100 seconds. Large scans (more than 100 ports, including custom ranges/lists) are limited to 1 per minute per visitor.
Open ports (0)
HTTP Header Inspector
Fetch the HTTP response status and headers for a URL.
Enter a URL to fetch its HTTP response status code and every response header the server sends back.
SSL / TLS Certificate Checker
Inspect a host's TLS certificate: issuer, validity dates, and days remaining.
Enter a hostname to inspect its TLS certificate — issuer, validity dates, and days remaining before it expires.
Geo-IP Lookup
Look up the geographic location and network info for an IP address. Leave empty to look up your own public IP.
Enter any IP address, or leave it empty to look up your own, to see its approximate location and network/ISP info.
Subnet / CIDR Calculator
Computed entirely in your browser — no data sent to the server.
Enter an IP address and CIDR prefix (e.g. 192.168.1.0/24) to instantly compute the network range, broadcast address, and usable host count.
Speed Test
Basic download/upload throughput test against this server (accuracy depends on the server's own uplink).
Press Start to measure download and upload throughput against this server. Accuracy depends on this server's own connection.
Country Code Dictionary
ISO 3166-1 alpha-2 country codes — searched entirely in your browser.
Search or browse the list of ISO 3166-1 alpha-2 country codes, looked up entirely in your browser.
| Country | ISO Code |
|---|
Phone Dialing Code Dictionary
International calling codes by country — searched entirely in your browser.
Search or browse international calling codes by country, looked up entirely in your browser.
| Country | Dial Code |
|---|
World Clock
Pick a time zone to see the current time — drag the globe to spin it.
Pick a time zone from the list, or drag the globe, to see the current time there.
—
—
Drag to rotate the globe.
Learn more about World Clock
What it is
Displays the current time across different time zones around the world, along with the exact, live-updated offset from your own local time - a piece of information that looks simple on the surface but turns out more subtle than it first appears once seasonal time-change rules are taken into account.
How it works
The calculation relies on the IANA (Internet Assigned Numbers Authority) reference time zone database, which incorporates not only each zone's base UTC offset but also the full set of seasonal time-change rules (daylight saving and standard time) specific to each country, along with their history of regulatory changes over the years.
Reading the results
The offset shown between two time zones is not always a whole number of hours - some zones around the world are offset by 30 or even 45 minutes from their neighbors, contrary to a widely held assumption. That offset can, on top of that, shift by plus or minus one hour depending on the exact time of year if the two zones being compared don't switch to daylight saving time on the same calendar dates - a temporary shift that is a frequent source of confusion when scheduling international meetings.
Common mistakes
A classic mistake when scheduling international meetings is fixing a recurring meeting at a set time without accounting for the fact that the two zones involved don't necessarily switch to daylight saving time on the same calendar dates - a meeting perfectly aligned one month can end up shifted by a full hour the following month without anyone having thought about it at the time of the original scheduling.
When to use it
Scheduling meetings or maintenance windows with teams spread across several time zones - typically coordination between a delivery team in France and an MSP provider based in India, a scenario directly representative of a distributed organization. Working out the exact local time behind a timestamp found in the technical logs of a system hosted in a different time zone, to correctly reconstruct an incident timeline.
French Mobile Network Status
Mobile antenna sites down or under maintenance in France, by operator (Orange, Free, SFR, Bouygues Telecom), from ARCEP's public data. Snapshot updated once a day by ARCEP - not a minute-by-minute feed.
Browse mobile antenna and fibre outage data by French operator — no input needed, updated automatically from ARCEP's public data.
Most affected departments
Number of sites currently down or under maintenance, by department. Click an operator above to filter.
Data: Arcep — Sites indisponibles · Official network status map
Fixed Network (Fibre)
Fibre (FTTH) network quality by operator: reported-outage rate and connection-failure rate, from ARCEP's public data. Monthly indicators, 6-month rolling average - not a live feed like the mobile section.
By operator (parent group)
Averages over the last 6 available months, per infrastructure-operator parent group.